Artel InfinityLink ILC156D, Installation And Operation Manual, Page: 26 / 36

16 ILC156 Function Modules Installation and Operations Manual
ILC156 Function Modules
Table 5. ILC156D Elements
Item ILC156D Element for details, see...
1 BNC channel connectors for transmitting SD and HD video
when used individually or SD, HD, and 3G when used as
channel pairs as follows:
•
A—Paired with Channel B for 3G operation
• B
• C—Paired with Channel D for 3G operation
• D
• E—Paired with Channel F for 3G operation
• F
Note: 3G Operation can only be configured on the ILC156M.
Cabling the Video Output BNC Connections
(page 19)
2 Rear panel BNC channel transmit status LEDs:
•
STAT—Output status indicator
• RATE—Output rate indicator
Understanding the ILC156D Status LEDs
(page 19)
3 XFP socket for the following optical connections:
•
TX—Transmit
• RX—Receive
Cabling the XFP Connections (page 19)
4 Rear panel module status LEDs:
•
EMS—Element management system indicator
• OK—Alarm indicator
Understanding the ILC156D Status LEDs
(page 19)
5 Channel enable DIP switch SW4. Configuring the ILC156D (page 16)
6 Video alarm, optical repeater function, and EMS enable DIP
switch SW5.
7 Front panel status LEDs:
•
TX—XFP transmit status indicator
• RX—XFP receive status indicator
• RX ERR—Receive error indicator
• RATE A–F—BNC receive rate indicator
• OK—Alarm indicator
• EMS—Element management system indicator
• STATUS A–F—Channel status indicator
Understanding the ILC156D Status LEDs
(page 19)
8 Front panel Channel Select switch—Allows you to select the
channel signal to monitor. Using the ILC156D Monitor Jack (page 21)
9 Front panel monitor 75 Ohm HD-BNC output jack.
10 Backplane connector—Provides power to the module,
allows the module to share signals with other function
modules, and is used for alarm and management signals. N/A
(Continued)