Artel InfinityLink ILC156D, Installation And Operation Manual, Page: 14 / 36

4 ILC156 Function Modules Installation and Operations Manual
ILC156 Function Modules
Table 1. ILC156M Elements
Item ILC156M Element for details, see...
1 BNC channel connectors for receiving SD and HD video
when used individually or SD, HD, and 3G when used as
channel pairs as follows:
•
A—Paired with Channel B for 3G operation
• B
• C—Paired with Channel D for 3G operation
• D
• E—Paired with Channel F for 3G operation
• F
Cabling the Video Input BNC Connections
(page 10)
2 Rear panel BNC channel input status LEDs:
•
STAT—Input status indicator
• RATE—Input rate indicator
Understanding the ILC156M Status LEDs
(page 10)
3 XFP socket for the following optical connections:
•
TX—Transmits the aggregated video signal
• RX—Receive (not used)
Cabling the XFP Connections (page 10)
4 Rear panel module status LEDs:
•
EMS—Element management system indicator
• OK—Alarm indicator
Understanding the ILC156M Status LEDs
(page 10)
5 Rate selector switches SW1, SW2, and SW3. Configuring the ILC156M Module (page 5)
6 Channel enable DIP switch SW4.
7 Video alarm enable and EMS enable DIP switch SW5.
8 Front panel status LEDs:
•
TX—XFP transmit status indicator
• RATE A–F—BNC receive rate indicator
• OK—Alarm indicator
• EMS—Element management system indicator
• STATUS A–F—Channel status indicator
Understanding the ILC156M Status LEDs
(page 10)
9 Front panel Channel Select switch—Allows you to select the
channel signal to monitor. Using the ILC156M Monitor Jack (page 12)
10 Front panel monitor 75 Ohm HD-BNC output jack.
11 Backplane connector—Provides power to the module,
allows the module to share signals with other function
modules, and is used for alarm and management signals. N/A