Artel InfinityLink ILC156D, Installation And Operation Manual, Page: 23 / 36

ILC156 Function Modules Installation and Operations Manual 13
Understanding and Using the ILC156D
2. Pull down on the XFP handle to dislodge it from the
ILC156
.
3. Using the XFP handle, pull the XFP out of the
module
.
Removing the ILC156 Module
To remove the
ILC156
from the host chassis, perform the following steps:
1. Remove the fiber optic cables from the XFP.
2. Remove the coaxial cables from the BNC connectors.
3. Loosen the two mounting screws that secure the
ILC156
to the host chassis.
4. Using the two mounting screws, pull the
ILC156
out of the host chassis.
Caution
To avoid problems associated with overheating, do not leave a function module slot open when
power is applied to the chassis. Every module slot must contain a module or blank tray to ensure
proper ventilation when power is applied.
Understanding and Using the ILC156D
This section, which describes how the ILC156D works and how to configure, install, and cable the module,
contains the following topics:
• ILC156D Module Functional Description (page 13)
• Overview of the ILC156D Module (page 15)
• Configuring the ILC156D (page 16)
• Installing the ILC156D Module and XFP (page 18)
• Cabling the ILC156D Module (page 18)
• Monitoring the ILC156D Module Operation (page 19)
• Removing the XFP and ILC156D Module (page 21)
ILC156D Module Functional Description
This section provides a functional description of the ILC156D, including Figure 9 , which is a functional block
diagram of the module.