SKU TPA2001R
For technical questions please call 1-866-278-6653
Page 2
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating, inspec-
tion, maintenance and cleaning procedures. Write the product’s serial number in the back
of the manual near the assembly diagram (or month and year of purchase if product has
no number). Keep this manual and the receipt in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING! Read all instructions Failure to follow all instructions listed below
may result in serious injury.
The term “vacuum chamber in all of the warnings
listed below refers to your ArtMolds Vacuum Chamber.
SAVE THESE INSTRUCTIONS
1. Work area safety
a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b.
Keep children and bystanders away while operating a vacuum chamber.
Distractions can cause you to lose control.
2. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a
pneumatic tool. Do not use a vacuum chamber while you are tired or under the
influence of drugs, alcohol or medication.
A moment of inattention while operat-
ing pneumatic tools may result in serious personal injury.
b.
Use safety equipment. Always wear eye protection.
Safety equipment
such as dust mask, work gloves, non-skid safety shoes, hard hat, or hear-
ing protection used for appropriate conditions will reduce personal inju-
ries.
c. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewelry or long hair can be
caught in moving parts.
d. If devices are provided for the connection of chemical vapor extraction and col-
lection facilities, ensure these are connected and properly used.
Use of these
devices can reduce vapor-related hazards.
3. Vacuum Chamber use and care
a. Do not over tighten the pneumatic fittings Use the correct tool for your applica-
tion.
The correct tool will do the job better and safer at the rate for which it was
designed.
b.
Disconnect the vacuum chamber from the air source before making any
adjustments, changing accessories, or storing.
