Arroyo Instruments TECPak 585 Series, User Manual

Page: 11 / 40

TECPak User’s Manual · Page 11
Name Description Factory
Default
Computer
Command
PID I The integral term of the PID
loop. Will only be available if
Gain is set to PID .
0.01 TEC:I
PID D The derivative term of the PID
loop. Will only be available if
Gain is set to PID .
0 TEC:D
Sensor Sets the temperature
measurement sensor. Can be
Therm 100uA , Therm 10uA ,
Therm, RTD , or RTD (4-wire) .
Therm
100uA TEC:SENS
T-Low Lim T-Low Lim is the lower
temperature limit. If operating in
T Mode and the actual
temperature drops below this
value, the output will be turned
off. Temperature limits not
monitored in R Mode or Ite
Mode. Limit monitoring can
also be disabled in software
(see TEC:ENAB:OUTOFF
command).
-99°C TEC:LIM:TLO
T-High Lim T-High Lim is the upper
temperature limit. If operating in
T Mode and the actual
temperature rises above this
value, the output will be turned
off. Temperature limits not
monitored in R Mode or Ite
Mode. Limit monitoring can
also be disabled in software
(see TEC:ENAB:OUTOFF
command).
125°C TEC:LIM:THI