Page 16 ·
TECPak
User’s Manual
TEC Output Connector
The Output connection is a female DB-15, and has the following pin-out:
DB-15 Pin
Description
1, 2, & 9
TE (+)
3, 4, & 10
TE (-)
5 & 6
Earth Ground
7
8 Sensor-
11 Fan+
12 Fan
–
14 Remote
*
15 Remote
Sensor-*
Output Connector (DB-15 Female)
* Used in RTD 4-wire operation only.
Analog Interface Connector
The Analog Interface connection is a male DB-15, and has the following pin-out:
DB-15 Pin
Description
1
On/Off Control Input
2 On/Off
Status
Output
3 Stable
Output
4
Analog Temperature Monitor
5
Analog Temperature Set*
6 Ground
7 +5V
Auxiliary
Supply
8 Ground
Output Connector (DB-15 Female)
* Disabled when in RTD 4-wire measurement mode.
The +5V auxiliary supply is provided for external low-power electronics. Current
draw on this supply should not exceed 100mA. The Ground pin provides the
ground reference for the logic and analog inputs as well as the auxiliary power
supply. The analog interface is described in detail in the
Using the Analog
Interface
section below.
NOTE
RTD and fan functionality is only available on TECPaks
with serial number 130203819 or higher.
Summary of Contents for TECPak 585 Series
Page 1: ......