Page 14 ·
TECPak
User’s Manual
Name
Description
Factory
Default
Computer
Command
RTD C
C term in the RTD equation.
4.00000E-12 TEC:CONST
RTD R
0
R
0
term in the RTD equation.
100.00 TEC:CONST
Communications Settings
Baud
This sets the baud rate for the
RS232 serial port. See the
Computer Interfacing Manual
which is included on the CD
that accompanied this product.
9600
N/A, fixed at
9600
Err While
Rmt
To turn off the display of errors
while in remote mode, set this
value to “No”. To display errors
while in remote mode, set this
value to “Yes”.
Yes
REMERR
Terminal
Mode
Terminal mode simply echoes
any characters received over
the serial or USB interfaces.
No
TERMINAL
Msg Term
This controls the output
message termination, and can
be set to CR/LF, CR, LF, or
None.
CR/LF
TERM
Arroyo Control
While most of the settings of the
TECPak
can be changed over the computer
interface using your own program (see the
Computer Interfacing Manual
for
more detail), in many cases you simply want to operate the instrument from the
PC like any other bench-top instrument.
As mentioned earlier in this manual,
Arroyo Control
is a free software
application that gives you 100% operating control of the
TECPak
, allowing you
to change limits, settings, and set points, as well as monitor the operation of the
instrument. From
Arroyo Control
, you can also enable the analog interface, and
set the precision of the analog set point. You can install
Arroyo Control
from the
CD or download it from our web site (go to the Software section).
Summary of Contents for TECPak 585 Series
Page 1: ......
