background image

BUILDING DIMENSIONS  

* Size rounded off to the nearest foot

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

Missing Parts, Questions on Assembly?

Call:  1-800-851-1085 or 

[email protected]

Do not return to dealer, they are not 

equipped to handle your requests.

Owner's Manual & Assembly Instructions

       SS01

714880716

 

                                           Exterior Dimensions                     Interior Dimensions                    Door

       *Approx.                Base                   (Roof Edge to Roof Edge)                      (Wall to Wall)                       Opening

           Size                    Size                  Width       Depth       Height           Width       Depth      Height       Width     Height     

        10' x 14'          121" x 160 1/4"         123 1/4"    162 3/4"     97 1/8"          118 1/4"    157 1/2"     95 7/8"      55 1/2"    69 1/4"      

  Storage Area:    129 Sq. Ft.  952 Cu. Ft.

 

                 12,0 m

2

          27,0 m

3

 

 

  3,0 m x 4,0 m    307,3 cm x 407,0 cm        313,1 cm     413,4 cm     246,7 cm           300,4 cm     400,1 cm    243,5 cm      141,0 cm  175,9 cm

Model No.   RH1014-C1      697.68615-A1

 

 

Summary of Contents for RH1014-C1





































Reviews: