Parts Needed For
Gable Assemblies
Step 13
6000 Right Gable (2)
6001 Left Gable (2)
5971 Roof Beam Bracket (4)
26
STEP
1
5971
Roof Beam
Brackets
Washer
6001
6000
FRONT
(8)
The gables go on top of the front and
rear walls to support the roof beams.
NOTE
The gables are packed nested
together and might be mistaken
as one piece. Carefully separate
them before continuing.
1
Apply edge trim to the top edge
of the right gables and left gables.
2
Attach the four roof beam
brackets to the gables using two
bolts, washers and nuts.
NOTE
Mounting leg of bracket must
face toward center of gable
and holes closest together
must be on top
To avoid mishap on the sharp
edge the edge trim must remain
in place on the top edge of the
gable until right and left roof
panels are in place.
CAUTION:
Edge Trim
(Plastic Piece)
STEP
2
BU26
1
Lift and fasten a right and left
gable, under angle at corner, to
the rear wall angle with screws.
2
Join the left and right gables
together with a gable brace us-
ing a bolt in the bottom hole only.
3
Repeat Steps 1 & 2 for the door
track on the front of building, except
for the track supports, fasten as
shown.
Left Gable Assemblies (2)
Right Gable Assemblies (2)
6635 Gable Brace (2)
Parts Needed For
Gables/Braces
Step 14
SX27 ctr
STEP
2
STEP
3
STEP
1
6635 Gable Brace
Track Supports 6228
Gable
(22)
(3)
27
