- 12 -
ENGLISH
- Before fastening the stirrups check the dimension
on the
support frame is not more than the value reported in the assembling
table. In the following assembling table are reported the reference
dimensions for the set up of the actuator.
“C”
-
it is advisable not to choose values of
and
too
different between them, so to ensure a regular move of the wing
and a lower stress on the actuator. By increasing the dimension
the opening corner grows up and, therefore, the thrust on the wing
is reduced and the peripheral speed increased. By increasing the
dimension
the opening corner is reduced and, therefore, the
thrust on the wing is increased and the peripheral speed reduced.
Warning:
“A”
“B”
“A”
“B”
OPENING
A (mm)
B (mm)
C (mm)
D (mm)
90°
140
140
90 max
755
120°
140
100
50 max
755
