●
Parts Needed For
●
Gables/Roof Beams
Step 12
SO25hw
●
●
●
●
●
Left Gable Assemblies (2)
●
●
●
●
●
Right Gable Assemblies (2)
●
●
●
●
●
Single Roof Beam Assemblies (2)
●
●
●
●
●
6636 Gable Brace (2)
25
1
Lift and fasten a right and left
gable, under angle at corner, to the
door track and rear wall angle with
screws.
Hint:
On the front gable, leave out 2
screws closest to center gable leg.
On the rear gable, use a bolt and nut
at the overlapping rear wall angle.
2
Fasten the
single roof beam
to
the outer gable leg as shown using
bolts.
Hint:
The holes along the length of
the beam must be on the
top
surface.
Repeat Step 1 for the opposite side of
building.
3
Join the
left and right gables
together with a
gable brace
using a
bolt in the second hole from the
bottom
only
. Do this step for both
front and rear gables.
Repeat Step 2 for the opposite side of
building.
STEP
3
6636 Gable Brace
STEP
1
10386 Roof Beam (Single)
STEP
2
Gable
Nut and bolt
at rear of building.
(28)
(12)
