Information for OEM Integrator
This device is intended only for OEM integrators under the following conditions:
1)
The antenna must be installed such that 20 cm is maintained between the antenna
and users, and
2)
The transmitter module may not be co-located with any other transmitter or
antenna.
[End product labelling]
The label for end product must include “Contains FCC ID:
2ATUP-Q660500
, Contains IC:
25301-Q660500
”.
[CAUTION: Exposure to Radio Frequency Radiation]
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. “This equipment should be installed and operated with minimum distance
of 20cm between the radiator and your body. This transmitter module is authorized only
for use in device where the antenna may be installed such that 20 cm may be
maintained between the antenna and users.”
Hardware Reference Manual
Version 1.0
- 7
4
-
eInfochips Confidential
Summary of Contents for 17 00515 01
Page 1: ......
