Arrow Storage Products EPA64, Owner'S Manual & Assembly Manual

Page: 16 / 32

16
Gap 13/16” (2,1 cm)
Rear Wall Angle Must
Face Inside Building
Side Wall Angles Must
Face Outside Building
Rear Wall
Angle
1
10565
You will need for this page:
Step 4: Frames
Fasten the rear wall angle across the inside top of the rear wall using screws.
1
2
Fasten the
rear wall channel
across the
middle of the rear wall using screws.
16BL
Rear Wall
Channel
1
9925
Side Wall
Channel
2
10545
Side Wall
Angle
2
10564
(QTY: 2)
SS
(QTY: 38)
SS
The upper leg of the side wall angles
must face the outside of the building.
Door Track
1
10545
10564
Door Track/Header Assembly
10565
9925
10545
10564
3
Fasten the side wall angles
across the inside top of the
side panels using screws.
4
Fasten the
side wall
channels across the
middle of the side panels
using screws. Fasten
overlaps in rear corners
with screws.
5
Fasten the
door track/
header assembly (from
step 2) across the top
of the front wall panels
using screws. See the
fi gure.
5
1
2
3
4
Front