615
15BL
You will need for this page:
9389
Front Corner
Panel
2
10561
Rear Corner
Panel
2
9389
10563
Position
rear corner panels
at the rear
corners as shown. The widest part of
each corner panel must be placed along
the side of the building. Fasten corner
panels to the fl oor frame using four
screws.
Position
front corner panels
at the
corners of the fl oor frame as shown.
The widest part of each corner panel
must be placed along the front of the
building. Fasten the corner panels to
the fl oor frame.
2
10561
9389
10561
10563
Step 3: Corners/Wall Panels
10563
Wall Panel
2
Attach
wall panels
to the sides as shown.
3
The wall panels come in two widths. Each
panel has a crimped rib on one side. The
rib should go under the rib of the panel
that follows it.
Be careful to install the correct panel in each
position as shown.
Rear Wall Panel
Assembly
Front Wall Panel
Assembly
1
2
3
Be cautious when maneuvering and placing Panels.
Once Panels begin to go up it is important to be able
to fi nish in a timely manner to reduce the possibility
of wind damage to your building.
Use one person to support the Corner while
another secures the Panels. Do not leave the
Corner unsupported until it is secure.
1
(QTY: 28)
(QTY: 4)
Summary of Contents for EPA64
