Step 2
SV15
Parts Needed For
Frame Assemblies
The main frame pieces reinforce
the walls. These pieces will later be
installed in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
1
Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
eight bolts as shown.
2
Make two side wall channels by
overlapping the side wall channel
pieces as shown. Fasten each set
together with eight bolts as shown.
3
Overlap the rear wall angle
pieces as shown in the figure and
fasten them together with one bolt
in the center hole.
4
Make two side wall angles by
overlapping the side wall angle pieces
as shown. Fasten each set together
with one bolt thru the large hole at
the end of each part.
5
Double check the length of each
and set these pieces aside for later
use.
5986 Rear Wall Angle (2)
10389 Rear Wall Channel (2)
10390 Side Wall Channel (4)
10393 Side Wall Angle (4)
STEP
1
STEP
2
10389
10390
Side Wall Channels
140 3/8" 356,6 cm
Rear Wall Angle
118 1/8" 300,0 cm
5986
5986
10393
Side Wall Angles
140 3/8" 356,6 cm
STEP
3
4
Rear Wall Angle 118 1/8" 300,0 cm
Side Wall Angles 140 3/8" 356,6 cm (2 Assemblies)
STEP
5
STEP
Rear Wall Channel
118 1/8" 300,0 cm
10390
10389
10393
Rear Wall Channel 118 1/8" 300,0 cm
Side Wall Channels 140 3/8" 356,6 cm (2 Assemblies)
15
