Arrow Storage Products BW54-A, Owner'S Manual & Assembly Instructions

Page: 16 / 24

1
Position rear corner panels at the
corners of the fl oor frame as shown.
The widest part of each corner panel
must be placed along side of the
building. Fasten corner panels to the
fl oor frame using four screws.
Support the corner panel with a step
ladder until overlap is fastened.
2
Attach the front corner panels
to the front corners, as shown. The
crimped rib should go under the rib of
the adjacent panel. Fasten overlapping
rib using 2 screws and a bolt with nut.
NOTE
Be careful to install the correct
panel in each position as shown.
3
Double-check the part numbers
of the corner wall panels, before
proceeding.
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this
point if you do not have enough time to
complete the assembly today. A partially
assembled building can be severely
damaged by light winds.
NOTE
Each screw and bolt in the wall
requires a washer.
Parts Needed For
Corners
Step 3
7044 Corner Wall Panel (2)
6633 Corner Wall Panel (2)
The fl oor frame must be square
and level or holes will not align.
FRONT
STEP
TOP VIEW
7044
SIDE
REAR
Narrow
Side
6633
6633
SIDE
WideSide
1
STEP
2
7044
7044
6633
6633
Panels rest on
frame as shown
Crimped Rib
Underneath
Washer
STEP
3
BI16
7044
CORRECT
INCORRECT
16