The roof beams join the 2 gables
and support the roof panels. The
roof assembly is made up of 4 pieces
overlapped back to back at the center.
Hint:
These pieces are force-fi tted,
so you may have to press hard to join
them together.
1
Place the end of one roof beam
inside a second roof beam so that the
6 holes [4 holes if 2" (5,1 cm) beam]
in each piece align. Make 2 sets of 4"
(10,2 cm) roof beams and 4 sets of
2" (5,1 cm) roof beams by repeating
this procedure.
Do not insert bolts yet.
2
Take 2 of the pressed-together 4"
(10,2 cm) roof beams and join them as
shown to form the main roof beam as-
sembly. Hold the assembly together
and fasten with 14 bolts and nuts.
Make 1 assembly.
3
Make 2 of the press-together 2"
(5,1 cm) roof beams and join them
as shown to form the roof beam as-
sembly. Hold the assembly together
and fasten with 12 bolts and nuts.
Make 2 assemblies.
4
Set these pieces
aside for later assembly.
Step 3
BY16
Parts Needed For
Roof Beam Assemblies
10470 Roof Beam (4)
10471 Roof Beam (8)
STEP
1
Assembled
91 7/8" 233,4 cm
2" 5,1 cm
Roof Beam Assembly
at Outer Side of Roof
End
View
91 7/8"
233,4 cm
91 7/8"
233,4 cm
4" 10,2 cm
Roof Beam Assembly at Peak
STEP
2
STEP
3
2" 5,1 cm
10471
Make two sets 4" 10,2 cm
Make four sets 2" 5,1 cm
4" 10,2 cm
10470
2" 5,1 cm
10471
91 7/8" 233,4 cm
4" 10,2 cm
10470
16
Summary of Contents for BD88GB
Page 2: ......
