Arrow Storage Products BD88GB, Owner'S Manual & Assembly Instructions

Page: 15 / 32

Step 2
BY15

Parts Needed For

Frame Assemblies
The main frame pieces reinforce
the walls. These pieces will later be
installed in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
1
Overlap the rear wall channel
pieces as shown in the fi gure and
fasten the 2 pieces together with 1 bolt
in the center hole (3 holes will align).
2
Make 2 side wall channels by
overlapping the side wall channel
pieces as shown. Fasten each set
together with 1 bolt in the center hole
of each set.
3
Overlap the
rear wall angle
pieces as shown in the fi gure and
fasten them together with 1 bolt in
the center hole.
4
Make 2
side wall angles
by over-
lapping the side wall angle pieces as
shown. Fasten each set together with
1 bolt in the center hole.
5
Double check the length of each
and set these pieces aside for later
use.

6615 Rear Wall Angle (2)

9924 Rear Wall Channel (2)

9990 Side Wall Channel (4)

9991 Side Wall Angle (4)
STEP
1
Rear Wall Channel
94 5/8" 240,3 cm
STEP
2
9924
9990
Side Wall Channels
89 7/8" 228,3 cm
9990
Rear Wall Angle
94 5/8" 240,3 cm
6615
6615
9991
9991
Side Wall Angles
89 7/8" 228,3 cm
STEP
3
4
Rear Wall Channel
94 5/8" 240,3 cm
Side Wall Channels
89 7/8" 228,3 cm
Side Wall Angles
89 7/8" 228,3 cm
Rear Wall Angle
94 5/8" 240,3 cm
STEP
5
STEP
9924
15