1
In the Telephony Modem, click the Wireless Setup link in the navigation
menu, then click Wireless Bridging.
The Wireless Bridging window appears.
2
Check the
Enable Wireless Bridging
box.
3
(recommended) If you want to specify which Access Points are allowed to
connect to your network, check the
Enable ONLY Specific Access Points
to Connect
box and enter the MAC address of each Access Point in the AP1
through AP4 fields. You can enter up to four Access Points.
Note
: Most wireless devices have their MAC addresses printed on a label at-
tached to the back or bottom of the unit. Make sure you enter the wireless
(WLAN) MAC address; the Ethernet and WAN connections have different
MAC addresses.
4
Click the
Save
button to save your changes.
Touchstone WTM652 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration
Usage
Troubleshooting
Glossary
49
