Touchstone TM402 Telephony Modem User’s Guide
49
Getting
Battery
USB
Ethernet
Safety
Started
Installation
Installation
Drivers
Configuration
Usage
Troubleshooting
Glossary
Using the Standby Button
The Telephony Modem has a
Standby
button on top of the unit. Press the
Standby
button to switch between:
•
Inactive (normal) mode
: the Ethernet and USB interfaces are connected
to the Internet. The
Online
light stays on to indicate normal mode.
•
Active (standby) mode
: the Ethernet and USB interfaces are disconnect-
ed from the Internet. Computers connected to the Ethernet and USB inter-
faces can still communicate with each other, but not with the Internet. The
Online
light blinks to indicate active mode.
The Telephony Modem remembers the standby setting when you reset the Telepho-
ny Modem or turn it off. The Standby button does not affect telephony service; te-
lephony service will work regardless of the status of the internet connection.
The
Standby
button has no effect while the
Power
light is blinking.
Modem
Po
w
er
DS
US
Online
Link
Telephone 1
Telephone 2
Batt
er
y 1
Batt
er
y 2
Standb
y
Telephon
y
To
uchst
one
TM
Standby
button
