Arris Moxi HD, User Manual

Page: 125 / 152

TV Signal
The Moxi HD DVR requires a cable TV signal; over the air TV and satellite signals are not supported.
Analog Tuners
The Moxi HD DVR has two digital tuners. If you want to tune analog channels unavailable in digital format:
1. Sign in to your account at moxi.com
2. Under the account menu, choose Support.
3. If you’ve completed Moxi setup and there are analog channels available to you that are not showing up in the
Moxi Menu, you will see a panel called “Missing Channels” Select Continue, and moxi.com will walk you through
the process to determine whether you need an analog tuner.
Once you’ve received your analog tuner, follow these instructions to install it:
1. Plug in the USB connector from the external analog tuner to one of the USB ports. Note: it is not necessary
to unplug the Moxi system prior to plugging in the analog tuner.
2. If the Moxi system was unplugged, plug it in now. If the Moxi system remained powered-on, respond to the
confirmation note: A new tuner was detected. Moxi needs to restart to use this tuner. Restart now or later.
Select restart now to immediately see available analog channels in your programming guide.
Any time the external analog tuner is disconnected from the Moxi system or loses power, you are notified by a
confirmation note.
1. If the disconnection was accidental, check power-on and the USB connection and respond later to the
request to restart the Moxi system.
2. If the disconnection is intentional, and you no longer want to use the analog tuner, respond now to the
request to restart the Moxi system. Be aware that shows requiring this tuner will not be recorded. See a list of
cancelled shows in the Moxi Menu, Find and Record/Canceled and Deleted option.
Remember that your analog tuner allows you to watch or watch and record one analog channel at one time. If you
attempt to watch a different analog channel while an analog channel is recording, you will receive a conflict note.
Configuration Alternatives
119