Installation
IPC1100 Advanced IP Client Video Set-top
•
Installation and Operations Manual
29
365-095-24769 x.1 10/13
Operational Check for the Remote Control
The operational check tests communication with the remote control:
Feature
Testing Procedure
Power on
Press
power
on the remote control to turn on the IPC1100.
Tune the television to the output channel (3 or 4) if using the RF output.
Channel selection
Scan through the channels using the
c
or
-
keys.
Tune to several channels by entering the channel number using the numeric
keys.
Volume control
Press
or
-
on the remote control to increase the volume to its
upper limit, lowest level, and to a comfortable level.
Press
mute
to turn the sound off. Press
mute
again to restore the sound.
Note: The volume test cannot be used if the HDMI connection to the TV has
been chosen.
If the IPC1100 does not operate properly, refer to the
Troubleshooting
section.
BUI Access
The Basic User Interface (BUI) Menu provides a method to retrieve diagnostics without powering off the
application.
Recommended Method for Access to OSD Diagnostics functionality
It is recommended to enter OSD Diagnostics through the BUI Menu:
1.
Press and hold the “D” key on the IR remote for 5 seconds, then release the key. The BUI Main
Menu is shown in Figure 23.
a.
From the BUI Menu, the user can select and navigate to Diagnostics.
b.
From the BUI Menu, the user can select and navigate to User Setting Menu.
2.
The alternate method of accessing the diagnostics is to power on the IPC1100 and then
immediately press the select key twice (or the OK key) of the remote.
Note: The the MotoPLYR diagnostics are not available once the system has booted up, and therefore are
grayed out on the BUI Main Menu. For information and instructions related to MotPLYR, please refer to the
MotoPLYR-Client Installation and Operation Manual Version 1.3 (VMS).
