ARRI SRH-3, User Manual

Page: 22 / 54

! 22
!
8.2
Assigning Controls
Touching Controls will open a new touchscreen display
submenu named Assign Pan/Tilt/Roll Setpoint
(Pan, Tilt, Roll)
Select one of the available controllers and confirm
by touching Assign.
For example:
J1 H = Joystick 1 horizontal / Pan axis
Available controllers:
8.3
Unassigning Controllers
To unassign a selected controller, touch Unassign .
NOTE
After a function is unassigned, the function
will be only available through the touchscreen.
J1 V Joystick 1 V Joystick 1, up/down
J1 H Joystick 1 H Joystick 1, left /right
J2 V Joystick 2 V Joystick 2, up/down
J2 H Joystick 2 H Joystick 2, left /right
DRWP DRW Pan DRW-1, ARRI Wheels, Pan
DRWT DRW Tilt DRW-1, ARRI Wheels, Tilt
DRWR DRW Roll DRW-1, ARRI Wheels, Roll
V R VCW Roll PLC VC Wheels, Roll
V T VCW Tilt PLC VC Wheels, Tilt
V P VCW Pan PLC VC Wheels, Pan
EHDP EHD Pan EHD-1, ARRI Encoder Head, Pan
EHDT EHD Tilt EHD-1, ARRI Encoder Head, Tilt
TS Touchscreen Control through RCP
K1 … K8 Knob 1 … Knob 8 Knobs
B1 … B6 Button 1 … Button 6 Buttons
V SR VCW Speed Roll PLC VCW, Speed Roll Poti
V ST VCW Speed Tilt PLC VCW, Speed Tilt Poti
V SP VCW Speed Pan PLC VCW, Speed Pan Poti
V DR VCW Direction Roll PLC VCW, Direction Roll Switch
V DT VCW Direction Tilt PLC VCW, Direction Tilt Switch
V DP VCW Direction Pan PLC VCW, Direction Pan Switch
NOTE
Blue letters
indicate that the controller
is already in use.
Green letters
indicate the current selection
Yellow letters
indicate the controller which is
assigned currently
White letters
indicate that the controller
is available
Controls