8
Remote Control Setup
8.1
Auto Assignment DRW-1
SUP2.2
introducing the so-called Auto Assignment.
For a fast and easy setup, this menu
will show up, as soon the
DRW-1
is
connected to the
remote control
.
The Auto Assignment will set:
• DRW-1
Tilt, Pan and Roll axes
• SENSITIVITY
to
0
• DEADBAND
to
0
• RAMP
to
0
• MODE
Angle
8.2
Quick Setup
1. Daisy chain the single modules with each other
2. Connect the LBUS cable to the remote control
3. Select Pan, Tilt, Roll for each DRW-1 module
4. Press
OK
at the the touchscreen
Selecting
OK
automatically sets all required values.
NOTE
Press Cancel if the DRW-1 has already been
assigned and personal values have already been set.
Press
OK
to overwrite your previous settings.
The
Auto Assignment
function can be deactivated in the settings for the remote control.
8.3
Selecting the Mode
There are two ways to use the DRW-1:
Angle Mode
(preset) and
Speed Mode
.
Angle Mode
the right choice when
extremely
precise
movements are needed.
Every movement of the DRW-1 is transferred to
the remote head with the exact degree of precision.
Speed Mode
is the right mode when high
dynamic
action needs to be covered.
Touch
Menu
at the lower right corner of the
home screen to reach the
Main Menu
.
In the
Main Menu
select
Head
to reach
the head menu.
Touch
Mode
to toggle between
Angle
and
Speed.
Press
Save
after the Mode is selected.
Remote Control Setup
10
1
2
3
4