12
Motor layout
5 Motor layout
1 Setup button
2 Focus, Iris, Zoom indicator
3 LBUS connector 1
4 LBUS connector 2
5.1 Setup button
Motor assignment
Use the SETUP button to assign the cforce plus motor to the focus,
iris or zoom control of the respective control device. Make sure that
the assignment matches the lens axis the motor is attached to.
Press the SETUP button momentarily to indicate the current
motor assignment. The F (Focus), I (Iris) or Z (Zoom) indicator
underneath the SETUP button will light up for three seconds.
Press the SETUP button momentarily again to change the current
motor assignment. Toggle through until you reach the desired
setting.
Motor calibration
Press the SETUP button for three seconds to start the automatic
calibration of the respective motor.
Press the SETUP button momentarily during calibration to interrupt
the calibration process.
Summary of Contents for cforce plus
Page 18: ...18 Compatibility ...
Page 19: ...Compatibility 19 ...
