Array electronic AF-10MR-A, User Manual

Page: 78 / 122

FAB I
ntelligent
C
ontroller r
Section 3: the prompt voice message for playing when the Voice Module dials to
the external telephone.
NOTE
A) When Voice Module dials to an external telephone (a password has been set)
1. FAB will stop dialing if there is no response within 40 seconds, and keeps di-
aling every 20 seconds.
2. When you pick up TEL and inputs “*”, the Voice Module will keep mute. At
the same time you must input the 4-digit password. If you don’t input the pass-
word or input a less-than-4-digit password in 10 seconds, the Voice Module will
replay section 3; if you input the correct password, the Voice Module will play
section 1 and then enter the control code to operate according to your preset pro-
gram steps .
3. If the input password is incorrect, Voice Module will play section 2.
Note: you are permitted to input the password only for three times. If you input
a wrong password again in the third time, FAB will hang up the telephone and
return to the main system.
4. After finishing operations, enter ## key for ringing up.
B) When Voice Module dials to an external telephone (no password has been set):
1. FAB will stop dialing if there is no response within 40 seconds, and keeps di-
aling every 20 seconds.
2. When you pick up TEL, play the section 3 then enter the control code to operate.
3. After finishing the operations, enter ## key for ringing up.
C) When an external telephone dials into Voice Module (a password has been set)
1. When the Voice Module responds to the external telephone, section 0 will be
broadcasted circularly.
68
2. Section 4-98: the voice messages used for programming. The user can play
any of these sections, all according to their needs. But if they want to record
some of them, it needs to begin with section 0 and among the recorded sections
section0,section1,section 2 and section 3 are for voice system.