Array electronic AF-10MR-A, User Manual

Page: 53 / 122

C
hapter
Ⅳ
P
rogramming on
FAB
panel
Note:
The default password is 0001.
4.3 Function
The editing frame is shown in Fig4.4. The user can use and keys to
move the arrow > on the left and press the OK key to confirm the selection of
functions, four types of which are:
Editor: The function for programming editing. Editing-function Selecting
Frame (shown in Fig. 4.5) will appear when this function is selected;
FAB/Rom: The function for reading programs, modifying an address etc.
Set: The function for the setups of RTC and password;
RUN: The function for the beginning of running a FAB program.
Fig 4.4
4.3.1 Editor
If this function key is selected, the FAB will enter the Editing Function Selecting
Frame as shown in Fig. 4.5. The user may use
and keys to move the ar-
row > on the left and press OK key to select the functions.
Edit PRG (or New Prg): Input a new function block (consult 4.3.1.1);
Insert FB: Insert a function block into the existing program (consult 4.3.1.2);
Delete FB: Delete a function block from the existing program (consult 4.3.1.3);
Clear PRG: Delete all program blocks
>Editor
FAB/Rom
S
et..
RUN
43
>Edit Prg
Insert FB
Dclcte FB
Clear Prg
>New Prg
Insert FB
Dclcte FB
Clear Prg
or
Fig.4.5 Editing-function selecting Frame