ARMTEL TOP-PAD-IP2, User Manual

Page: 24 / 68

TOP-PAD-IP2 DESKTOP INTERCOM STATION
User Manual
page 22/64 armtel.com
© Armtel info@armtel.com
2.4 Installation, connection and dismantling
2.4.1 The main installation position of TOP-PAD-IP2 is desktop mounting. With
the desktop installation of TOP-PAD-IP2 on the base of the enclosure there is a stand for
better visibility of the keys (see 1.1.4.2 ). If TOP-HS-IP2 Handset unit or TOP-EC-IP2 Expansion
unit are used, in order to provide extra stiffness the modules can be attached to
TOP-PAD-IP2 by aluminum junction plates supplied with additional modules. Dimensions of
connecting plates, mounting configuration and desktop mounting variants are given in
Appendix B .
2.4.2 On request, the scope of supply includes an installation kit for wall-mounting of
TOP-PAD-IP2 consisting of two brackets and an aluminum mounting plate, as well as a set
of fasteners. The layout and the way of wall-mounting of the TOP-PAD-IP2 is given in
Appendix C .
2.4.3 On request, the scope of supply includes an installation kit for turntable-mounting
of TOP-PAD-IP2 representing the inclination angle changing mechanism and an aluminum
junction plate, as well as a set of fasteners. The layout and the way of turntable-mounting of
the TOP-PAD-IP2 is given in Appendix D .
2.4.4 The layout and recommendations for flush-mounting of TOP-PAD-IP2 are given
in Appendix E .
2.4.5 Before connecting the communication cables, the plugs should be removed from
the grooves in the base of the enclosure and in the stand (see Figure 6). TOP-PAD-IP2 is
connected to the network via Ethernet interface. The connection at the installation site is
carried out by means of supplied multicore Patch Cord communication cable tightened by
RJ-45 plugs, one of which is connected to the RJ-45 socket on the enclosure base. On
the other hand, the cable is connected to the network device with PoE power function. If
the unit is equipped with TOP-HS-IP2 Handset unit, the unit analog path is connected to
the RJ-22 socket, the digital path - to the RJ-25 socket. For correct connection of the interface
cables, a plate with the designation of the external connection sockets is used (see Figure 5 ).
The pin numbering and pinout of the connectors are given in Appendix A .
The cables connected to TOP-PAD-IP2 are laid in the grooves of the enclosure base
and the stand in accordance with 1.1.4.5 and Figure 6 .
When installation and connecting the cables are completed, fix the microphone
supplied on the front panel of TOP-PAD-IP2 by inserting it into the three-pin socket, aligning
the plug with the slot in the socket, then tighten the coupling nut on the microphone stand
up to block. If necessary, attach the wind protection cover to the microphone.
Examples remote connection TOP-PAD-IP2 in different equipment variants are given
in Appendix A .