TOP-PAD-IP2 DESKTOP INTERCOM STATION
User Manual
page 12/64
armtel.com
© Armtel
TOP-PAD-IP2 can be used in desktop version, in wall-mounted version, can also be
mounted on a turntable or flushed into the desktop, made of wood, metal or plastic. For
more information, see the Section
“Installation, connection and dismantling”
of this Manual.
1.1.4.2 TOP-PAD-IP2 is designed in a flat plastic enclosure, adjustable stand provides
the inclination angle for better visibility of keys and display. To impart stability, the stand
and turntable are equipped with rubber legs at the bottom.
To impart stability, the stand is equipped with rubber legs at the bottom. To adjust the
a)
b)
c)
Figure 3 – Adjustment of the stand
To adjust the stand:
a)
turn the unit upside down disconnecting it from the power supply and
interfaces, pull out four plugs from the grooves to install the stand and
simultaneously press the two latches at the base of the stand;
b)
insert the stand stoppers in the far-end grooves in the bottom of the enclosure;
c)
push the stand into the near-end grooves.
Remove the stand in the reverse order.
1.1.4.3 To provide wireless communication in the basic version of RMLT.465311.009
Desktop intercom station (with Wi-Fi module), the built-in dual band
Wi-Fi antenna Molex 1461530150 is used, which is fixed in the cover of the panel above the
main board. The antenna has a gain value of 2.8 dBi at 2.4 GHz and 4.2 dBi at 5 GHz, that
allows the wireless access point to be located at a distance of up to 100 meters from
TOP-PAD-IP2 or more - depending on the characteristics of the antenna on the access point.
