manualshive.com logo in svg

Armitage Shanks Sensorflow 21 A4845AA, Installation Instructions Manual

Share
Download
Armitage Shanks Sensorflow 21 A4845AA Installation Instructions Manual Download Page 2

2

TABLE OF CONTENT

1  IMPORTANT PRE-INSTALLATION NOTES ...................................... 3
2  PRODUCT BOX CONTENTS  ........................................................... 4
3  SUPPLY CONDITIONS ...................................................................... 5
4  WATER REGULATIONS .................................................................... 5
5  INSTALLATION GUIDE ...................................................................... 6

5.1 MOUNTING ..........................................................................................................6
5.2  PLUMBING OVERVIEW .......................................................................................7
5.3  ELECTRICAL CONNECTION ...............................................................................9

6  TAP OPERATION ............................................................................. 14
7  SENSOR RANGING ........................................................................ 15
8  OUTLET OPTIONS .......................................................................... 16
9 MAINTENANCE ............................................................................... 16

9.1  SOLENOID VALVE .............................................................................................16
9.2  HYGIENE FLUSH (AUTOMATIC) .......................................................................17
9.3  ISOLATING VALVE .............................................................................................18

10  SPARE PARTS ................................................................................. 19
11  CLEANING CHROME SURFACES ................................................. 20

Sensorflow 21 compact panel mount 

spout with integral sensor

These compact panel mount Sensorflow 21 electronic products are designed for water economy & 

hygienic “no-touch” operation.

The spout is operated by the integral infrared sensor which is triggered by hand movement in the 

sensing region. When the hands are moved away, the water will stop automatically within a couple of 

seconds.

These products are designed to be supplied with pre-mixed or cold water.

The two designs 150 & 230mm reach are each available in 3 versions: Mains powered (transformed) 

with option to link up to 5 link units & independent battery powered units:

A4845AA 

(150) &

 A4848AA 

(230) are supplied with

 battery unit

A4846AA 

(150) &

 A4849AA 

(230) are supplied with

 mains power unit

A4847AA 

(150) &

 A4850AA 

(230) are supplied with

 link unit 

 

 

 

       

(Link up to 5 per A4846AA or A4849AA)

Summary of Contents for Sensorflow 21 A4845AA





















Reviews:

No comments

Brands by name

Popular brands

Load more brands