17
ARMASIGHT by FLIR
PROMETHEUS C
U S E R M A N U A L
Remove the connector’s protective cap.
Connect the cable of Digital Video Recorder or the Extended Battery Pack to the Prometheus Connector.
Use plug A (Figure 3-2) of the video cable to connect an external video recorder/ monitor/ TV to the
Prometheus C. Connect plug C of the video cable to the Prometheus Connector.
Use plug B of the video cable to connect an external power source (6VDC/ 600mA) to the Prometheus C.
Connect plug C of the video cable to the Prometheus Connector.
FIGURE 3-2. VIDEO CABLE INSTALLATION
A
B
C
NOTE:
The external power supply must have a standard OD double-pole socket with a positive center
contact.
CAUTION:
After removing the cable, replace the protective cap over the connector.
3.1.3 INSTALLING THE PROMETHEUS C ON A TRIPOD
To mount the Prometheus C to a tripod, screw the tripod into the 1/4’’ threaded socket located on the side
of the Prometheus C.
CAUTION:
The unit may be badly damaged if the tripod collapses or falls over. Remove the unit from the tripod
if it is not within your reach.
