26
ARMASIGHT by FLIR
PROMETHEUS C
U S E R M A N U A L
6. Using the buttons on the control panel (Figure 3-14), configure the Prometheus C to adapt it to your
situation.
For more information on operational setting procedures, see Part 3.2 (Controls and Display Indications).
A. Adjust the brightness of the display for your comfort.
Push buttons (1) and (2) to increase/ decrease the display brightness by one level at a time
until you reach your desired brightness level.
B. Use UCMNUC/ FFC (User-Controlled Manual Non-Uniformity Correction/ Flat-Field Correction)
to improve image quality.
Push buttons (1) and (2) simultaneously to start manual UCMNUC/ FFC.
If necessary, interrupt the automatic process by pushing the central button (3) on the control
panel during the 5-second countdown, which will appear at the bottom of the display.
C. Use the digital zoom to magnify the central area of the image.
Hold down button (1) to gradually zoom in on the image. The 2x, 4x, and 8x symbols (maximum
zoom factor is dependent on equipment model) will appear in the top part of the display.
NOTE:
Digital zoom allows distant objects to appear larger; however, the resolution will be compromised.
D. Use the image palettes for optimal visualization of temperature changes in the scene.
Hold down the palette control button (2) to scroll through available palettes. The palette name
will appear in the top part of the display.
E. Adjust the necessary adjustment using the MAIN MENU. See Part 3.2.2 (Using the MAIN
MENU).
NOTE:
After configuration is complete, select EXIT on the MAIN MENU and push the SELECTION button to
leave the MAIN MENU. All settings will be saved.
CAUTION:
DO NOT leave the equipment activated when not in use.
