1
I. Safety Information
Do not operate the unit if the casing or the test Leads are or look
damaged.
Check the main function dial to ensure it is set at the correct position
before each measurement.
Do not perform resistance and continuity test on a live “powered
“system.
Do not apply voltage between the test terminals and test terminal to
ground that exceed the maximum limit referred to in this manual.
Exercise extreme caution when measuring live systems with voltage
greater than 60V DC or 30V AC.
Keep fingers behind the protection ring when measuring with test
leads.
Replace batteries when the symbol appears to avoid incorrect
data.
Environmental Conditions:
Altitude up to 2000 meters.
Operating temperature: 0°C ~ 40°C, <80% RH, non-condensing
Storage temperature: -10°C ~ 60°C, <70% RH, battery removed
Pollution Degree: 2
Explanation of Symbols:
Attention refer to operation Instructions.
Dangerous voltage may be present at terminals.
This instrument has double insulation.
Approvals:
EN61010 600V CAT III
N2068
