31
G711
AAC-LC
Sample Rate:
Supports 8 KHz and 16 KHz sampling options from this drop down menu.
Bit- Rate: Auto(64Kbps)
Alarm Level: Set the alarm level, values set from 1-100.
Output Volume:
Set the audio playback volume, values set from 1-100.
3.12. Modifying Alarm Settings
Click on the Alarm settings to enable this page
Enable Alarm:
This will switch ON/OFF the alarm in camera
Alarm Duration: From the drop-down list, select the length of the alarm (10sec, 30sec, 1 min,
5min, 10min, Non-Stop). This option will determine how long the ALARM signal should be ON
after it gets detected.
Alarm Trigger: You can change the Alarm Trigger mode in the Network camera:
Motion Detect: Activates or deactivates the alarm when the Motion is found based on
motion detection setting
Ethernet Lost: Activates or deactivates the alarm when the network connection is down or
network cable is tampered with
Audio Alarm: Activates or deactivates the alarm at high audio level based on the value set
in Alarm Level in Audio Page.
For External Triggers Input : Select one of the following options
ON: Corresponds to the ALM-IN in the IPNC, you can use GPIO connector.
OFF: Corresponds to the ALM-IN in the IPNC, GPIO connector is shut down.
For External Triggers Output : Select one of the following options
ON: Corresponds to the ALM-OUT in the IPNC, you can use GPIO connector.
OFF: Corresponds to the ALM-OUT in the IPNC, GPIO connector is shut down.
