26
ON
OFF
Backlight: Select the required range. The range is set to MIN, MED and HIGH values based on
user selection.
Dynamic Range Enhancement: Select Global Dynamic Range Enhancement options are:
Low Global Enhancement: This will enable Global dynamic range enhancement with lower
strength values
Medium Global Enhancement: This will enable Global dynamic range enhancement with
medium strength values
High Global Enhancement: This will enable Global dynamic range enhancement with high
strength values
Low Local Enhancement: This will enable Local and Global dynamic range enhancement
with lower strength values
Medium Local Enhancement: This will enable Local and Global dynamic range
enhancement with medium strength values
High Local Enhancement: This will enable Local and Global dynamic range enhancement
with high strength values
Note:
This feature (SALDRE) will work only with TI 2A algorithm, user need to ensure that 2A
engine selected in GUI is from vendor TI.
This is disabled for resolution above 720P.
All advanced features like Noise Filter, Video Stabilization and Lens Distortion
Correction algorithms will be switched OFF, if this feature is enabled.
Flicker Control: Select one of the following options of the Flicker device:
NTSC/60Hz : This will compensate for 60Hz flicker and will put the display if selected to
NTSC mode
PAL/50Hz : This will compensate for 50Hz flicker and will put the display if selected to PAL
mode
White Balance Mode: Select from the different options depending the light type.
Day and Night: Select one of the following options:
Day
Night
Auto
Histogram: Select one of the following options for switching histogram display. This will be
enabled only on primary stream:
OFF/ON button to enable/disable this option.
2A Engine: Select one of the following options to turn on/off the 2A Engine function:
ON
OFF
2A Mode: Select the required option. The options available are:
OFF: 2A is switched OFF
AE: Only Auto Exposure is switched ON
AWB: Only Auto White Balance is switched ON
