30
Date Format: From the Date format drop-down list, select one of the following modes to specify
the date format:
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
Note:
MM-Month, DD-Day, YY-Year
Time Format: From the Time format drop-down list, select one of the following modes to specify
the time format:
12 hour format
24 hour format
Date Position: This will set the position of the date on the captured image.
Bottom-Left
Bottom-Right
Time Position:
This will set the position of the time on the captured image.
Bottom-Left
Bottom-Righ
3.11. Modifying Audio Settings
Click on the Audio settings to enable this page
Enable Audio: This will switch ON/OFF the audio in camera
Audio Mode: You can change the audio mode in the Network camera in one of the following
ways:
Only Mic: Enables only audio capture in camera.
Only Speaker: Enables only audio playback in camera.
Both Mic & Speaker: Enables both audio playback & capture in camera.
Input Volume:
Sets the input capture gain, values set from 1-100
Encoding: Set which codec is used for encoding.
