DRAFT
Essential Camera
Modes, Rules, and Alerts
25
User Manual
Change motion sensitivity
You can edit a rule to change the motion sensitivity level for your cameras.
1. Open the Arlo app.
2. Tap
Mode
.
3. Select your camera.
4. Tap
Edit
next to the mode.
5. Tap
Edit
next to the rule.
6. Under If the following, tap
Edit
next to
Motion is detected
.
7. Move the slider to adjust the sensitivity level for motion detection for this camera.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click
Save
.
Automatically stop recording when motion stops
1. Open the Arlo app.
2. Tap
Mode
.
3. Select your camera.
4. Tap
Edit
next to the mode.
5. Under Then do the following, tap
Edit
next to Record video.
6. Select
Record until activity stops (up to 300 sec)
.
Control whether the turns on when motion
is detected at night
Unless you changed its settings, your camera automatically turns on its when it detects
motion at night. Your camera detects motion when
it’s in Armed mode or another mode
that uses a rule for detecting motion. When the turns on at night, it allows your Arlo
camera to record video in color.
Note:
You can also turn the on and off from the camera feed. (See
Turn the camera on and
off
on page 15.
