6
5. Repeat steps 2,3 & 4 until the water is
completely drained.
6. Replace the rubber plug and drain cap.
The Full Water indicator should now be
off. The unit is now capable of normal
operation.
Drain Hose
1. Remove the drain cap and rubber plug
from the drain hole.
2. Connect the drain hose to the drain
hole allowing the water to drain out
and away to a desired location. The
drain hose may be extended if required.
3. After draining replace the rubber plug
and drain cap. The Full Water indicator
should now be off. The unit is now
capable of normal operation.
MAINTENANCE
Important Note: Always unplug the
unit from the mains before
maintenance or cleaning
Cleaning the housing
• Use a soft damp cloth to wipe the body
clean.
• Never use aggressive chemicals, petrol,
detergents, chemically treated cloths or
harsh cleaning solutions – these may
cause permanent damage to the
external surface.
Cleaning the filter
Use a vacuum cleaner or just tap the filter
lightly to remove loose dust and dirt.
Rinse with hot water (no hotter than 40
o
C)
then dry thoroughly before replacing.
Important Note: Never operate the
unit without the filter fitted
STORAGE
• At the end of the summer season, when
the unit is not required for an extended
period, it should be correctly stored.
• Unplug the unit. Completely drain the
condensed water. Clean the filter.
• On a warm sunny day operate the unit
in fan mode for a couple of hours to dry
it out completely.
• Storage hooks are provided on the rear
of the housing for coiling the power
cord when not in use. Always unwind
the cord completely before use.
CPIN_518-2 15/9/04 5:08 PM Page 6