4
5
• Insert the screw into the closest
available hole on the edge of the kit
to hold it in position.
• Partially close the window to hold
together the window adaptor kit
securely.
• Insert the hose outlet into the window
adaptor and clip it into place.
NOTE:
• Free access of exhaust pipe is
important, ensure air in exhaust pipe
can run smoothly, installation errors will
bring bad influence of machine.
• Extreme length of unfolding exhaust pipe
is 1500mm, please shorten the length
as much as possible and keep it level as
much as possible when installing.
• Place the machine on flat ground, and
keep it far from around things at least
50cm.
• Make sure the socket can be reached
from machine location.
• Keep the machine stand upright so that
compressor can work well.
• Make sure free access of air-inlet and
air-outlet.
• Don’t use spraying agent (such as
pesticides, paint) or other flammable
materials, otherwise plastic
deformation, or even electric damage of
the machine may be caused.
• Avoid exhaust-pipe with sharp bend.
IMPORTANT:
The hose length has been
specifically designed for this product. Do
not replace or increase the length of the
hose with attachments. If the venting of the
exhaust air is inhibited in any way the unit
may overheat and shut off.
GBIN004060
GBIN004060
Exhaust Hose
INSTALLATION
Please Note: Selection of Installation Place
• Install the unit on a flat and dry place.
• Leave at least 50cm space around the Unit (when the hose is not connected).
Mounting in the Wall
Correct Bending
1. Place the hose inlet over the exhaust
outlet by sliding in the Hose Inlet.
2. This air conditioner is required to
have the exhaust hose fitted over
the hose inlet. Pull few threads of
the exhaust hose.
Fix the exhaust hose to the moulded
threads on hose Inlet by turning it in a
counter-clockwise direction. The exhaust
hose can be extended from 310mm
to 1400mm long (approx), however it
is recommended to use the shortest
possible length.
PLEASE NOTE: Pull one end of the
exhaust hose apart by several
threads before you attempt to fix
it with hose inlet/outlet.
3. (Optional – Not included) Connect the
hose outlet to the other end of the
exhaust hose by turning it in a counter-
clockwise direction. Place the exhaust
hose securely on the moulded threads of
the hose outlet.
4. Sliding Window (Horizontal/Vertical)
(Optional – Not included)
• Slide the window open.
• Place the window adaptor kit into the
opening, telescope window adaptor to
fit the window (Horizontal/Vertical).
Hose
Inlet
Exhaust
Outlet
Exhaust Hose
Hose
Outlet
Sliding Window Kit (Optional – Not included)
Remote Control
Hose Inlet
Hose Outlet (Optional –
Not included)
Accessories
Exhaust
Hose
2 Piece
Adjustable
Window
Kit
Vertical
Vertical Installation
Exhaust
Hose
2 Piece
Adjustable
Window
Kit
Horizontal
Horizontal Installation
Please Note: Mounting Illustrations
Wrong Bending
WARNING:
Prevent any bow or bend in
the middle of the hose, as this will trap
hot exhaust air, which will radiate into
the room and cause the unit to shut off
automatically (Due to overheating).