Arktic 235164, User Manual

Page: 7 / 108

7
EN
• To ensure proper operation of the appliance, the
products have to be placed in a way that does not
block the circulation of cooled air inside the ap-
pliance.
• When the door is open, cool air escapes from the
chamber, therefore it is recommended to lim-
it the door opening frequency to the necessary
minimum.
Control panel
Lights Buttons
Compresor
Illuminated – Compressor on
Blinks – Time delay between two starts enabled
(AC parameter)
Up
Press and release - increasing the value of the se-
lected parameter.
Defrosting
Illuminated – Defrosting in progress
Blinks – Condensing in progress
Down
Press and release - decreasing the value of the se-
lected parameter.
The Celcius Scale
Illuminated – Unit of measure
Blinks – Programming mode
Set
Press and release – displays the target, requested
value of the set temperature
The Fahrenheit Scale
Illuminated - Unit of measure
Blinks- Programming mode
Defrosting
Press and hold for min. 2 seconds
- Manual defrosting will start
Cooling Fan
Illuminated – fan activated
Blinks - Time delay of fan activation
Operation of control panel
1) Switch on the appliance
• Ensure the power switch is on [O] position.
Plug the appliance into an earthed socket.
• Turn the green power switch to [I] position to
switch on the appliance.
• The current temperature in the appliance is
displayed.
2) Review the setting temperature
• Press the button, the setting tempera-
ture will be displayed.
• Press the button again or wait for more
than 5 seconds, the display return to show the
current temperature.