7
To attach
optional
camera, pico projector, or Mevo camera adapter,
unscrew shaft knob and remove phone holder, ring, and ball adapter.
Attach the 25mm ball end of the camera adapter to the shaft and
tighten clockwise to secure.
6
Adjust the height of the pole by loosening the adjustment collar
counterclockwise. Tighten clockwise to set height.
5
Shafts can be adjusted by unscrewing the shafts’ knobs to loosen.
Tighten knobs to set.
Consumer Hotline:
USA
(800) 841-0884
INT’L
(626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan and USA
© Copyright 2018 Arkon Resources, Inc.
Safety Precautions
Arkon Resources, Inc. is not responsible for any damages caused to your
device or yourself due to the installation or use of this mount.
!
page 2
4
Using two hands, insert phone into the holder by pushing the device
into one of the spring-loaded support arms. Expand the other support
arm and fully insert device until it lays flat against the blue rubber pad.
CLAMPRV29
|
Arkon Pro Stand Clamp Mount for Phone or Cameras
rev.091818
