-18-
Set OSD Parameters
Language
Chinese/English Page switching
Show Lat-long
Show longitude and altitude
AD Calibrate
Battery voltage calibration
OSD Pattern
OSD interface selection
Default
: Normal interface
Fighter
:HUD interface
P or N (Xin)
PAL/ NTSC selection
Show RSSI
Display the AR port's voltage, 0-3.3V is corresponding to 0-100%
Cur Man Calibrate
Current calibration %. The current sensor will adjust and input the correct
power. Consumption after landing to calibrate the displayed battery capacity
(MAH).
Unit
Ft(imperial)and Meter(Metric)Unit Selection
；
LowPowerAlarm
There will be a flicker alarm when flight power is lower than this value.
Flight Parameters
Roll
Roll Reverse
Pitch
Pitch Reverse
