Always check polarity
when connecting to Powerpack.
Incorrect termination may
cause damage
CAUTION
Removable
isolator key
Accessory
12V plug
Terminals
Wing nuts
Washers
Connecting the battery
2
The Powerpack is suitable for most 12V DC batteries, we
recommend AGM (sealed batteries).
Powerpack internal dimension:
330mm L x 180mm W x 240mm H
External dimension: 360mm L x 240mm W x 320mm H
18
17
1
2
3
4
5
6
1
16
15
19
14
Place the battery into the Powerpack base and fasten via the
internal battery securing strap.
If the battery is small in size we suggest to pack suitable foam
around the battery to stop battery movement.
Ensure Powerpack switch isolator is in the off position
and the Powerpack adaptor is not connected.
Connect the positive red cable to the positive (+) battery
terminal post and the negative black cable to the negative (-)
battery terminal post. If the charging and conditioning LED
flashes 1 sec on 1 sec off, this indicates reverse polarity
connection or a short in the battery.
Fasten the terminals securely.
Close the lid and fasten the latches.
Please note that your battery terminals position may differ from the illustrated view.
