Using smartcharge
1
2
3
2
3
5
5
4
1
5
The Powerpack smart charge is based upon an advanced
software program that monitors your battery. Smart charge will
select from the following auto charge cycles to optimise your
battery’s performance.
The auto charge cycles are as follows:
Charge
Recovers a flat battery to a peak voltage. Charges the battery
until it reaches 12.5V.
If reaches 12.5V will proceed to bulk.
If fails to reach 12.5V after a period of 125 hours.
Will proceed to conditioning.
Conditioning indicator will flash 5 secs on 2 secs off,
this indicates that your battery is very weak or may have a
faulty cell. You can decided to repeat charge cycle by pulling
out and replacing the power adaptor or check battery
with your supplier.
Bulk
Tops up battery for extra capacity. Raises battery
voltage to 13.8V.
If reaches 13.8V will proceed to boosting.
If fails to reach 13.8V after a period of 125 hours of charging
time, will move to conditioning.
Boosting
Peak charge for maximum performance battery charge is
maintained at 13.8V for 5 hours to boost the battery then
proceeds to rest.
14
18
19
13
16
15
17
Lid
Base
Latches
Accessory port 10A fuse
Positive battery cable (red)
Negative battery cable (black)
Internal battery securing strap
12V DC battery
not supplied
18
13
16
15
14
19
17
For your own safety do not
remove internal covers as these
are non-servicable parts
CAUTION
