Arjohuntleigh NIMBUS, Instructions For Use Manual

Page: 20 / 32

14
Controls, Indicators and Alarms
On/Off Switch
(And Alarm Reset)
Situated on the side panel of the pump, this switches the
power on and off. It is combined with an internal battery
circuit that will activate the alarm system if the power
supply is interrupted prior to switching off. Examples
are accidental power lead removal or power failure.
Control Panel
New pumps have different icons on the control panel
compared to old pumps. For a detailed description of the
controls and indicators, you must refer to the correct
control panel section:
• Old control panel icons for pumps which have a nine
digit serial number starting with a 631 prefix, e.g.
631000001, refer to “Old Control Panel Icons” on
page 14.
• New control panel icons for pumps which have a ten
digit serial number starting with a 09 prefix, e.g.
0900000001, refer to “New Control Panel Icons” on
page 16.
Old Control Panel Icons
Power Indicator
A green light on the front panel indicates that the power
is
ON
.
Wait Indicator
If the pump detects low pressure in the mattress
replacement, the
WAIT
indicator is illuminated and the
pump performs a start up procedure to inflate the
mattress replacement.
Once correct operating pressures have been reached the
WAIT
indicator goes out.