Arjohuntleigh NIMBUS, Instructions For Use Manual

Page: 17 / 32

11
5. Operation
These instructions cover day-to-day operation of the
system. Other operations, such as maintenance and
repair, should only be carried out by suitably qualified
personnel.
System Optimization The
Nimbus Pediatric
System automatically
compensates for patient weight distribution and
position, optimizing the pressure relieving performance.
To ensure that the pressure relieving properties are not
impaired, the cover must not be pulled tight and any
covering sheets not fitted too tightly. Similarly, any
covering sheets should not be too loose to cause
wrinkling. Always use the
Nimbus Pediatric
mattress
with the protective top cover.

Placing extra layers and catheter tubes between the patient and the mattress
potentially reduces the benefits provided by the mattress and should be
avoided or kept to minimum.
Modes of Operation
The system provides 3 modes of operation:
• Dynamic
• Static
• Autofirm

The pump defaults to Dynamic mode when switched on.
Dynamic Mode
Provides the optimum pressure relieving properties and
should be used in most cases.
The support surface beneath the patient will cycle every
10 minutes.
Static Mode
Provides a non-moving support surface for instances
where a dynamic support system is contra-indicated.
All cells are equally inflated and remain constant.
Autofirm Mode
Provides a non-moving support surface with increased
firmness to assist in the application of certain nursing
procedures (physical therapy, etc).
All cells are equally inflated at an increased pressure for
30 minutes before reverting to dynamic mode.