Service Procedures
20
0
0
1
.1
60
1
0.
3
3 re
v
. 8
Strap Roll Replacement
Required tools:
•
Retaining ring plier
1. Refer to "Main Plastic Cover Replacement” on page 9 to remove plastic covers.
2. Refer to “Pass Through Hook Replacement” on page 11 to remove the Pass Though Hook.
3. Refer to “Strap Inlet Replacement” on page 11 to remove the Strap Inlet.
4. Remove the snap ring that holds the strap roll shaft using appropriate pliers and remove the
shaft.
5. Remove the strap roll and replace it with a new one.
6. Reinsert the strap roll, apply grease
(PN 001.14140) over the strap roll
shaft and reinsert it into the strap roll.
Make sure that the strap is placed
behind the strap roll. Put the snap rings
back.
7. Refer to “Strap Inlet Replacement” on
page 11 to reinstall the Strap Inlet.
8. Refer to “Pass Through Hook
Replacement” on page 11 to reinstall the Pass Though
Hook.
9. Refer to "Main Plastic Cover Replacement” on page 9 to reinstall the plastic covers.