Arjohuntleigh FLOWTRON UNIVERSAL, Instructions For Use Manual

Page: 20 / 32

14
Checking the Status of the Battery
Battery Label
To Check the Battery
Status:
1. Remove the battery from the pump unit.
2. Press the Reset/Status Latch which will activate the
2 LEDs on the top of the battery.
If the battery pack is not on charge, the LEDs will
display one of the following conditions:
If the battery pack is on charge via the optional battery
charger, the LEDs will display one of the following
conditions:
+ -
LED 1 LED 2
80-100% Charge
Battery Pack OK
Battery Pack
needs recycling
Battery Pack
Fault
30-80% Charge
<30% Charge
Press Reset / Status Latch
Jack Socket Polarity
LED 1 LED 2 Battery Status
Green Green
The Battery Pack is OK. It has > 80% charge.
Green Green
The Battery Pack is OK. It has between 30-80% charge.
Green
The Battery Pack is OK. It has < 30% charge.
Red Green
The Battery Pack needs recycling*. It has between 30-80% charge.
Red
The Battery Pack needs recycling*. It has < 30% charge.
Red
The Battery Pack has an error. Press Reset/Status Latch.
The Battery Pack has an error. Try recharging.
LED 1 LED 2 Battery Status
Green Green
The Battery Pack is OK. It is fully charged.
Green
The Battery Pack is charging.