Installation
The safety side pad is held in place with a top flap (1) . ENT-ACC61 has two
additional straps (2) which are secured with hook-and-loop fasteners.
Raise the safety side. Pull open the flap along the full length of the pad. Unfasten
the two straps at the bottom of the pad (ENT-ACC61 only).
Position the pad between the mattress and safety side, with the flap and straps on
the outside of the safety side.
Fold the flap over the top safety side rail and fasten it in place. Pass the straps
around the safety side uprights and fasten them. Make sure both straps are tight.
ENT-ACC61 safety side pads installed on Enterprise 5000
WARNING
Make sure the pad is securely attached to the safety side
1
2
2
2
