24
Transfer from Sling Lift to Carevo
Follow these 15 Steps
(For sling and lift instructions, see respective sling and lift
IFU
.)
1
Lower the
Carevo
to lowest height.
2
Apply the castor brakes on the
Carevo
.
(See Fig. 1)
3
Make sure both
Carevo
side supports are folded up.
4
Raise the
Carevo
adjustable back support, if available, to a
more seated position for comfort and easier detachment of
the sling.
(See Fig. 2)
5
Place the head pillow in the
Carevo
.
(See Fig. 2)
Lower the patient in the sling onto the
Carevo
. Use the
space under the
Carevo
castor base for better positioning of
the lift legs.
(See Fig. 2)
continue with the steps on the next page
6
WARNING
To avoid entrapment, make sure to keep the
patient’s hair, arms and feet close to the body
and use designated grab supports during any
movement.
WARNING
To avoid the patient from falling out of the
device make sure that all side supports are in a
locked position.
NOTE
If the lift height is not enough to pass over the
Carevo
, then fold down the side support on one
side. Make sure to fold the side support back up
afterwards.
Fig. 1
Fig. 2
Summary of Contents for Carevo
